Category: picoFahrrad

I completed the welding of pF’s frame! Next post should show the assembled frame and front end. Tubing for the fork came from the chain stays of an old road bike frame. A wedge was cut from the tubing, and then it was bent and welded. The dropouts are 0.188″ steel cutouts inserted in welded […]

This is the picoFahrrad, a small, soon to be electrified bike/scooter. I will hopefully weld the frame soon so that the mechanics are finished. The rear wheel is a 7.5″ DIA pneumatic that will be belt driven, probably by a DC motor. Hopefully the electric motor portion will serve as the final project component of […]